Products Benefits About Contact Shop Now

Home / Products / Indoor Saunas / Aurora 4P

New

Aurora

4-Person Full-Spectrum Infrared Sauna

Canadian Hemlock · 1800 × 1200 × 1900 mm · 15A dedicated circuit

NZ$8,849 NZ $6,849

Why Aurora 4P

Full-spectrum
infrared wellness.

The Aurora delivers near, mid, and far infrared in a single cabin — designed for a thorough, even sweat with the lowest EMF on the market.

Full-Spectrum Heat

5 full-spectrum heaters + 2 carbon panels + foot heater. The full infrared range for a thorough, even sweat.

Ultra-Low EMF

0–3 milligauss. Lower than most household appliances. Standard, not an upgrade.

Wi-Fi Control

Touch panel with app. Set temperature, lighting and heaters from your phone before you step in.

Spacious 4-Person

1800mm wide cabin with Canadian Hemlock and dark-tinted tempered glass. Room for the family or a recovery group.

Technical Specifications

Built for
deep infrared.

Full-spectrum heaters, ultra-low EMF, and Wi-Fi control — engineered for serious infrared performance in a spacious 4-person cabin.

Capacity

4 People

Power

2,300W

15A dedicated circuit

Temp Range

30–70°C

Warm-up

~10 min

To 40°C

Timber

Hemlock

Canadian Hemlock

Weight

219 kg

Product Details

Everything you
need to know.

Dimensions1800 × 1200 × 1900 mm
Weight219 kg
Power2,300W / 220–240V
Circuit15A dedicated circuit
Heaters5 full-spectrum + 2 carbon panels + 1 foot heater
EMF0–3 mG
Warm-up40°C in ~10 min / 70°C in 20–30 min
ControlsWi-Fi touch control with app
Audio2 speakers (Bluetooth / AUX)
Lighting7-colour LED star light + reading lamp + remote
ExtrasOxygen ioniser, temperature sensor, light sensor, air vent
Glass8 mm dark-tinted tempered glass

Installation Requirements

  • 15A dedicated circuit required — have a licensed electrician confirm your circuit before delivery
  • DIY assembly in approximately 2 hours with 2 people — no special tools needed
  • Indoor use: home gym, spare room, garage, wellness area, or commercial recovery space
  • Ensure adequate ventilation in the installation area
  • Level floor surface required — minimum clearance of 100 mm from walls recommended

What's in the Box

  • Cabin panels (Canadian Hemlock)
  • 5 full-spectrum infrared heaters
  • 2 carbon fibre heating panels
  • 1 foot heater
  • Glass door (8 mm dark-tinted tempered)
  • Bench seating
  • Wi-Fi touch control panel
  • 2 speakers (Bluetooth / AUX)
  • 7-colour LED star light
  • Reading lamp + remote
  • Oxygen ioniser
  • Temperature sensor
  • User manual

User Manual

Download the full Aurora 4-Person Infrared Sauna user manual for detailed assembly instructions, electrical requirements, maintenance guidelines, and warranty information.

Download Aurora 4P Manual (PDF)
Ultra-Low EMF

EMF so low it's
barely measurable.

0–3 mG

Milligauss — well below safety thresholds

Every Aurora sauna is built with ultra-low EMF heaters that measure between 0 and 3 milligauss — lower than most household appliances like hairdryers (40–100 mG) or laptops (5–20 mG). This isn't an optional upgrade. It's the standard on every unit we ship. Sit closer to the heaters, stay longer, and know the engineering was done right.

SAA Certification Badge

SAA Certified for New Zealand & Australia

The Aurora range carries SAA (Standards Australia Approval) certification, confirming compliance with electrical safety standards across Australia and New Zealand. Every unit is tested and certified before it leaves the factory — giving you confidence that your sauna meets the same safety benchmarks required of all commercial electrical appliances sold in the region.

Common Questions

Frequently
asked.

Traditional saunas heat the air around you (typically to 80–100°C), while infrared saunas use infrared light to heat your body directly at a lower ambient temperature (30–70°C). This means you can sweat more comfortably, stay in longer, and still get a deep, therapeutic sweat. Many people find infrared easier to tolerate, especially for longer or more frequent sessions.
The Aurora requires a 15A dedicated circuit. We recommend having a licensed electrician confirm your circuit before delivery. The sauna itself is DIY assembly — two people can have it built in around 2 hours with no special tools. The electrical connection is plug-and-play once the circuit is confirmed.
EMF stands for electromagnetic fields — a form of radiation emitted by electrical devices. The Aurora's heaters measure between 0 and 3 milligauss, which is well below safety guidelines and lower than most household appliances. For reference, a typical hairdryer produces 40–100 mG. Ultra-low EMF is standard on every Aurora, not an optional upgrade.
The Aurora reaches 40°C in approximately 10 minutes and full operating temperature (up to 70°C) in 20–30 minutes. With Wi-Fi control, you can start the warm-up from your phone before you're ready to step in — so it's at the perfect temperature when you arrive.
View all Sauna FAQs

Complete the contrast.
Heat up, then get cold.

Contrast therapy — alternating between sauna heat and cold immersion — is one of the most powerful recovery protocols available. Pair your Aurora sauna with an Ice Bath for the full ritual.

View Ice Bath

Aurora 4-Person Infrared Sauna

NZ$6,849

Ready to build
your infrared ritual?

Delivery across New Zealand. DIY assembly in ~2 hours. 2-year warranty from date of purchase.

Configure & Buy Above
2-Year Warranty Delivery NZ Wide Secure Checkout

Complete Your Setup

You might also
need these.

Aurora 3-Person Infrared Sauna

Aurora 3-Person

Full-spectrum infrared in a compact 3-person cabin. Same ultra-low EMF, same Wi-Fi control.

from NZ$5,749 View →
Ice Bath

Ice Bath

Galvanised steel ice bath in 4ft or 5ft. The cold half of your contrast therapy routine.

from NZ$784 View →