Products Benefits About Contact Shop Now
aurora 2p infrared sauna

Home / Products / Indoor Saunas / Aurora 2P

New

Aurora

2-Person Full-Spectrum Infrared Sauna

Canadian Hemlock · 1000 × 950 × 1900 mm · 10A standard plug

NZ$6,349 NZ $4,749

Why Aurora 2P

Full-spectrum
infrared wellness.

The Aurora delivers near, mid, and far infrared in a single cabin — designed for a thorough, even sweat with the lowest EMF on the market.

Full-Spectrum Heat

5 full-spectrum heaters + 2 carbon panels + foot heater. The full infrared range for a thorough, even sweat.

Ultra-Low EMF

0–3 milligauss. Lower than most household appliances. Standard, not an upgrade.

10A Plug-In

Plugs into any standard 10A household outlet. No electrician, no dedicated circuit, no extra cost.

Compact 2-Person

1000mm wide cabin with Canadian Hemlock and dark-tinted tempered glass. Fits comfortably in a spare room, garage, or home gym.

Technical Specifications

Compact cabin,
serious performance.

Full-spectrum heaters, ultra-low EMF, and plug-and-play simplicity — engineered for serious infrared performance in a compact 2-person cabin.

Capacity

2 People

Power

1,350W

10A standard plug

Temp Range

30–70°C

Warm-up

~10 min

To 40°C

Timber

Hemlock

Canadian Hemlock

Weight

~130 kg

Product Details

Everything you
need to know.

Dimensions1000 × 950 × 1900 mm
Weight~130 kg
Power1,350W / 220–240V
Circuit10A standard plug (no electrician needed)
Heaters5 full-spectrum + 2 carbon panels + 1 foot heater
EMF0–3 mG
Warm-up40°C in ~10 min / 70°C in 20–30 min
ControlsSoft-touch control panel
Audio2 speakers (Bluetooth / AUX)
Lighting7-colour LED star light + reading lamp + remote
ExtrasOxygen ioniser, temperature sensor, air vent
Glass8 mm dark-tinted tempered glass

Installation Requirements

  • Plugs into any standard 10A household outlet — no electrician required
  • DIY assembly in approximately 2 hours with 2 people — no special tools needed
  • Indoor use: home gym, spare room, garage, wellness area, or commercial recovery space
  • Ensure adequate ventilation in the installation area
  • Level floor surface required — minimum clearance of 100 mm from walls recommended

What's in the Box

  • Cabin panels (Canadian Hemlock)
  • 5 full-spectrum infrared heaters
  • 2 carbon fibre heating panels
  • 1 foot heater
  • Glass door (8 mm dark-tinted tempered)
  • Bench seating
  • Soft-touch control panel
  • 2 speakers (Bluetooth / AUX)
  • 7-colour LED star light
  • Reading lamp + remote
  • Oxygen ioniser
  • Temperature sensor
  • User manual

User Manual

Download the full Aurora 2-Person Infrared Sauna user manual for detailed assembly instructions, electrical requirements, maintenance guidelines, and warranty information.

Download Aurora 2P Manual (PDF)
Ultra-Low EMF

0–3 mG

Milligauss — well below safety thresholds

Every Aurora sauna is built with ultra-low EMF heaters that measure between 0 and 3 milligauss — lower than most household appliances like hairdryers (40–100 mG) or laptops (5–20 mG). This isn't an optional upgrade. It's the standard on every unit we ship. Sit closer to the heaters, stay longer, and know the engineering was done right.

SAA Certification Badge

SAA Certified for New Zealand & Australia

The Aurora range carries SAA (Standards Australia Approval) certification, confirming compliance with electrical safety standards across Australia and New Zealand. Every unit is tested and certified before it leaves — giving you confidence that your sauna meets the same safety benchmarks required of all commercial electrical appliances sold in the region.

Common Questions

Frequently
asked.

Traditional saunas heat the air around you (typically to 80–100°C), while infrared saunas use infrared light to heat your body directly at a lower ambient temperature (30–70°C). This means you can sweat more comfortably, stay in longer, and still get a deep, therapeutic sweat. Many people find infrared easier to tolerate, especially for longer or more frequent sessions.
No. The Aurora 2P plugs into any standard 10A household outlet — no electrician, no dedicated circuit, no extra cost. The sauna itself is DIY assembly — two people can have it built in around 2 hours with no special tools.
EMF stands for electromagnetic fields — a form of radiation emitted by electrical devices. The Aurora's heaters measure between 0 and 3 milligauss, which is well below safety guidelines and lower than most household appliances. For reference, a typical hairdryer produces 40–100 mG. Ultra-low EMF is standard on every Aurora, not an optional upgrade.
The Aurora reaches 40°C in approximately 10 minutes and full operating temperature (up to 70°C) in 20–30 minutes. The compact 2-person cabin heats up efficiently, so it's ready when you are.
View all Sauna FAQs

Complete the contrast.
Heat up, then get cold.

Contrast therapy — alternating between sauna heat and cold immersion — is one of the most powerful recovery protocols available. Pair your Aurora sauna with an Ice Bath for the full ritual.

View Ice Bath

Aurora 2-Person Infrared Sauna

NZ$4,749

Ready to build
your infrared ritual?

Delivery across New Zealand. DIY assembly in ~2 hours. 2-year warranty from date of purchase.

Configure & Buy Above
2-Year Warranty Delivery NZ Wide Secure Checkout

Complete Your Setup

You might also
need these.

Aurora 3-Person Infrared Sauna

Aurora 3-Person

Full-spectrum infrared in a spacious 3-person cabin. Same ultra-low EMF, more room to move.

from NZ$5,749 View →
Ice Bath

Ice Bath

Galvanised steel ice bath in 4ft or 5ft. The cold half of your contrast therapy routine.

from NZ$784 View →